Noninvasive and Continuous Monitoring of On-Chip Stem Cell Osteogenesis Using a Reusable Electrochemical Immunobiosensor.

Noninvasive monitoring of biofabricated tissues during the biomanufacturing process is needed to obtain reproducible, healthy, and functional tissues. Measuring the levels of biomarkers secreted from tissues is a promising strategy to understand the status of tissues during biofabrication. Continuous and real-time information from cultivated tissues enables users to achieve scalable manufacturing. Label-free biosensors are promising candidates for detecting cell secretomes since they can be noninvasive and do not require labor-intensive processes such as cell lysing. Moreover, most conventional monitoring techniques are single-use, conducted at the end of the fabrication process, and, challengingly, are not permissive to in-line and continual detection. To address these challenges, we developed a noninvasive and continual monitoring platform to evaluate the status of cells during the biofabrication process, with a particular focus on monitoring the transient processes that stem cells go through during in vitro differentiation over extended periods. We designed and evaluated a reusable electrochemical immunosensor with the capacity for detecting trace amounts of secreted osteogenic markers, such as osteopontin (OPN). The sensor has a low limit of detection (LOD), high sensitivity, and outstanding selectivity in complex biological media. We used this OPN immunosensor to continuously monitor on-chip osteogenesis of human mesenchymal stem cells (hMSCs) cultured 2D and 3D hydrogel constructs inside a microfluidic bioreactor for more than a month and were able to observe changing levels of OPN secretion during culture. The proposed platform can potentially be adopted for monitoring a variety of biological applications and further developed into a fully automated system for applications in advanced cellular biomanufacturing.

Conch Shell (Turbinella pyrum) Powder: A Potential Marine Biological Source of Calcium and Some Trace Minerals for Growing Crossbred Calves.

The present study was conducted to evaluate the effect of feeding conch shell (Turbinella pyrum) powder (either fresh or calcined) as a marine organic source of calcium (Ca) supplemented in the diet of crossbred calves on voluntary intake, growth performance, and blood biochemistry in growing crossbred Jersey calves. A growth trial of 90 days was conducted on 15 Jersey crossbred female calves (Av. weight, 70.68 ± 2.90 kg; Av. age, 197.73 ± 12.40 days), equally divided into three groups of 5 animals each, i.e., control (T0), treatment 1 (T1), and treatment 2 (T2). All animals were fed total mixed ration (TMR) prepared with a concentrate mixture, chaffed paddy straw, and green fodder at the ratio of 40:30:30 on DM basis. Calves under the control group were fed with TMR containing a standard mineral mixture having dicalcium phosphate (DCP) as a Ca source. Calves under T1 group were supplemented with TMR containing fresh conch shell powder (FCSP), and T2 calves were fed with TMR containing conch shell calcined powder (CSCP) as Ca source. We observed 11.66% increase (p < 0.01) in Ca concentration in CSCP compared to FCSP. The concentration of minerals like Mg, Co, Mn, and Fe was enhanced in CSCP compared to the FCSP. However, the calcination process of fresh conch shell powder (FCSP) reduced the concentration of Cu, and Zn. The Ca/P ratio was estimated as 2.11, 2.06, and 2.10 in T0, T1, and T2 diets, which could be considered ideal for calf ration. Calves under T1, and T2 groups consumed significantly (p < 0.001) greater amounts (g/kg W0.75) of DM and CP compared to T0. However, increased voluntary intake did not translate into increased body weight gain (kg), and feed conversion ratio (kg DMI/kg gain) in T1 and T2 groups in comparison to T0. We observed similar blood glucose, urea, alkaline phosphatase (ALP), aspartate aminotransferase (AST), and alanine transaminase (ALT) concentration among the three treatments. Ca, and P levels in blood plasma were also identical among the three groups. The digestibility of Ca was increased significantly (p = 0.01) in FCSP (T1)- and CSCP (T2)-treated calves compared to control (T0) calves. Similarly, T1 and T2 enhanced P digestibility compared to T0. This first report with short-term experimentation depicted some promising scope for the use of locally available conch shell powder (fresh or calcined form) as a potential source of Ca for feeding to livestock, because these new sources of Ca did not affect intake, digestibility of Ca and P, growth performance, blood chemistry, and liver enzymes negatively in weaned crossbred calves.

Interferon Lambda Signaling Restrains Experimental Autoimmune Encephalomyelitis.

IFN-λ is a type III interferon (IFN) with pleiotropic functions in modulating immune responses. To address its function in autoimmune neuroinflammation, we evaluated the development and progression of experimental autoimmune encephalitis (EAE) in IFNLR1KO (Ifnlr1-/-) and C57Bl/6 (WT) mice following immunization with MOG35-55 peptide. The results show that Ifnlr1-/-mice developed significantly more severe EAE than WT littermates with a similar day of onset, suggesting the potential of IFN-λ in reducing disease severity. We next interrogated whether IFN-λ differentially modulates EAE induced by encephalitogenic Th1 cells or Th17 cells. Encephalitogenic Th1 or Th17 generated from WT donors were transferred into WT or Ifnlr1-/-recipient mice. Whereas encephalitogenic Th1 cells induced more severe EAE in Ifnlr1-/- than WT recipients, the disease severity induced by encephalitogenic Th17 cells was similar. Additionally, in vitro experiments showed that Ifnlr1-/-macrophages promoted the expansion of myelin peptide-reactive Th17 cells but not Th1 cells. Early in the disease, the spinal cords of EAE mice displayed a significantly greater proportion of Ly6C-Ly6G+ cells with CXCR2+CD62Llo phenotype, indicating activated neutrophils. These findings suggest that IFN-λ signaling restrains activation and migration of neutrophils to the CNS, potentially attenuating neutrophil-mediated disease progression in autoimmune neuroinflammation. Recombinant IFN-λ can be used as a potential therapeutic target for treatment of patients with multiple sclerosis as it has fewer side effects due to the restricted expression of its receptor.

Metabolism of Tembotrione, a Triketone Herbicide, confers Differential Sensitivity in Winter Wheat (Triticum aestivum).

Tembotrione is a triketone herbicide widely used for broad-spectrum weed control in corn but not registered for use in wheat. A wide collection of spring, winter, and EMS-derived mutant lines of wheat was evaluated for their response to tembotrione treatment. Two winter wheat (WW) genotypes (WW-1 and WW-2) were found to be least sensitive to this herbicide, surviving >6 times the field recommended dose (92 g ai ha-1) compared to the most sensitive genotype (WW-24). Further, HPLC analysis using [14C] tembotrione suggested that both WW-1 and WW-2 metabolized tembotrione rapidly to nontoxic metabolites. Pretreatment with a P450 inhibitor (malathion) followed by tembotrione application increased the sensitivity of WW-1 and WW-2 genotypes to this herbicide, suggesting likely involvement of P450 enzymes in metabolizing tembotrione similar to corn. Overall, our results suggest that the genotypes WW-1 and WW-2 can potentially be used to develop tembotrione-resistant wheat varieties.

Spectral tweezers: Single sample spectroscopy using optoelectronic tweezers.

A scheme that combines optoelectronic tweezers (OET) with spectroscopic analysis is presented. Referred to as spectral tweezers, the approach uses a single focused light beam that acts both as the trapping beam for OET and the probe beam for spectroscopy. Having simultaneous manipulation and spectral characterization ability, the method is used to isolate single micro-samples from clusters and perform spectral measurements. Experimental results show that a characteristic spectral signature can be obtained for a given sample. The proposed approach can be easily integrated into the optical setups used for conventional OETs with only a few additional optical components, making it a convenient tool for bio-analytical applications.

Mouldable Conductive Plastic with Optimised Mechanical Properties.

This paper investigates making an injection mouldable conductive plastic formulation that aims for conductivity into the electromagnetic interference (EMI) shielding range, with good mechanical properties (i.e., stiffness, strength, and impact resistance). While conductivity in the range (electrostatic charge dissipation) and EMI shielding have been attained by incorporating conductive fillers such as carbon black, metals powders, and new materials, such as carbon nanotubes (CNTs), this often occurs with a drop in tensile strength, elongation-to-break resistance, and impact resistance. It is most often the case that the incorporation of high modulus fillers leads to an increase in modulus but a drop in strength and impact resistance. In this work, we have used short carbon fibres as the conductive filler and selected a 50/50 PBT/rPET (recycled PET) for the plastic matrix. Carbon fibres are cheaper than CNTs and graphenes. The PBT/rPET has low melt viscosity and crystallises sufficiently fast during injection moulding. To improve impact resistance, a styrene-ethylene-butadiene-styrene (SEBS) rubber toughening agent was added to the plastic. The PBT/rPET had very low-impact resistance and the SEBS provided rubber toughening to it; however, the rubber caused a drop in the tensile modulus and strength. The short carbon fibre restored the modulus and strength, which reached higher value than the PBT/rPET while providing the conductivity. Scanning electron microscope pictures showed quite good bonding of the current filler (CF) to the PBT/rPET. An injection mouldable conductive plastic with high conductivity and raised modulus, strength, and impact resistance could be made.

Common Reasons for Permanent Tooth Extraction and Its Correlation with Demographical Factors in Kabul, Afghanistan.

Objective: The aim of this survey was to investigate the main reasons for extraction of permanent teeth, and its correlation with age, gender, education level, smoking habits, and time of last dental visit, family income, and professions in Kabul, Afghanistan. Subjects and Methods: The study proposal was approved by Research Ethics Committee of Khatam AL Nabieen and was conducted over a period of 5 months; its population consisted 594 patients, aged 10-70 years, who underwent extraction. The frequency distribution was calculated using X2 test, ANOVA and t-test for differences in mean number of patients. Results: A total of 594 patients underwent extraction. The highest rate (53.8%) of extraction occurred for those 21-40 years old. Females compromised 51.3% of patients. Two hundred (33.6%) patients were uneducated. Tooth loss due to caries was 30.1%; patient-request was 18.3%; impacted teeth was 14.4%. Other causes were periodontal reasons, failed root canal therapy (RCT), Tooth mobility, and Root fractures. Conclusion: The result of this survey indicated that caries, patient request, and impaction were the leading reasons for tooth extraction. The majority of patients were uneducated, and had insufficient family income. Most of the patients were housewives and laborers.

Bismuth ferrite based acetone gas sensor: evaluation of graphene oxide loading.

We report a BiFeO3/graphene oxide (BFO/GO) perovskite, synthesized using a CTAB-functionalized glycine combustion route, as a potential material for acetone gas sensing applications. The physicochemical properties of the developed perovskite were analysed using XRD, FE-SEM, TEM, HRTEM, EDAX and XPS. The gas sensing performance was analysed for various test gases, including ethanol, acetone, propanol, ammonia, nitric acid, hydrogen sulphide and trimethylamine at a concentration of 500 ppm. Among the test gases, the developed BFO showed the best selectivity towards acetone, with a response of 61% at an operating temperature of 250 °C. All the GO-loaded BFO samples showed an improved gas sensing performance compared with pristine BFO in terms of sensitivity, the response/recovery times, the transient response curves and the stability. The 1 wt% GO-loaded BiFeO3 sensor showed the highest sensitivity of 89% towards acetone (500 ppm) at an operating temperature of 250 °C. These results show that the developed perovskites have significant potential for use in acetone gas sensing applications.

2D nanostructures: Potential in diagnosis and treatment of Alzheimer's disease.

Two-dimensional (2D) nanomaterials have garnered enormous attention seemingly due to their unusual architecture and properties. Graphene and graphene oxide based 2D nanomaterials remained the most sought after for several years but the quest to design superior 2D nanomaterials which can find wider application gave rise to development of non-graphene 2D materials as well. Consequently, in addition to graphene based 2D nanomaterials, 2D nanostructures designed using macromolecules (such as DNAs, proteins, peptides and peptoids), transition metal dichalcogenides, transition-metal carbides and/or nitrides (MXene), black phosphorous, chitosan, hexagonal boron nitrides, and graphitic carbon nitride, and covalent organic frameworks have been developed. Interestingly, these 2D nanomaterials have found applications in diagnosis and treatment of various diseases including Alzheimer's disease (AD). Although AD is one of the most debilitating neurodegenerative conditions across the globe; unfortunately, there remains a paucity of effective diagnostic and/or therapeutic intervention for it till date. In this scenario, nanomaterial-based biosensors, or therapeutics especially 2D nanostructures are emerging to be promising in this regard. This review summarizes the diagnostic and therapeutic platforms developed for AD using 2D nanostructures. Collectively, it is worth mentioning that these 2D nanomaterials would seemingly provide an alternative and intriguing platform for biomedical interventions.

Comparing knowledge, attitudes, and practices in cardiovascular disease prevention and health promotion between community and hospital pharmacists in Saudi Arabia: A cross-sectional study.

Purpose: Saudi Arabia is one of the leading nations in the world in terms of the high frequency of chronic diseases and their associated risk factors. Knowledge and awareness are crucial for pharmacists to play an active role in the prevention of cardiovascular diseases (CVD). The current study assessed the pharmacists' knowledge, attitude, and practice to determine the potential differences with respect to their respective practice settings toward CVD prevention and related health promotions. Methods: It is a cross-sectional study targeted the registered pharmacists in the Kingdom of Saudi Arabia. An online questionnaire was prepared, and the link was circulated through various social media platforms. Descriptive statistics, multivariate linear regression analysis and chi square test were used to analyze the data accordingly. Results: A total of 324 pharmacists were included in the study. Among these, 157 (48.4 %) were community pharmacists, and the remaining were hospital pharmacists (51.6 %). No significant differences in knowledge scores were observed between community and hospital pharmacists. The mean attitude score among community and hospital pharmacists was found to be 26.40 ± 5.125 and 25.09 ± 5.393 respectively, which was statistically significant (p = 0.026). Similarly, the total practice scores across the settings were statistically significant (p = 0.02). Gender plays a significant role in terms of knowledge scores among both community and hospital pharmacists (p = 0.016 & 0.029). Gender, professional practice experience, and number of prescriptions handled and prescriptions with CVD medications showed significant differences in the distribution of positive attitudes and good practice frequency between community and hospital pharmacists. Conclusion: It is evident that there is a deficiency in knowledge among hospital pharmacists compared to community pharmacists. Which indicates that there is a need for a rigorous continuous pharmacy education covering the fundamental aspects of CVD primary prevention and health promotion among pharmacists, given more focus on hospital pharmacists.

Phytochemical characterization of Typha domingensis and the assessment of therapeutic potential using in vitro and in vivo biological activities and in silico studies.

Typha domingensis, a medicinal plant with significant traditional importance for curing various human diseases, has potentially bioactive compounds but was less explored previously. Therefore, this study aims to investigate the therapeutic potential of T. domingensis by evaluating the phytochemical profile through high-performance liquid chromatography (HPLC) techniques and its biological activities (in vitro and in vivo) from the methanolic extract derived from the entire plant (TDME). The secondary metabolite profile of TDME regulated by reverse phase ultra-high-performance liquid chromatography-mass spectrometry (RP-UHPLC-MS) revealed some bioactive compounds by -ve and +ve modes of ionization. The HPLC quantification study showed the precise quantity of polyphenols (p-coumaric acid, 207.47; gallic acid, 96.25; and kaempferol, 95.78 µg/g extract). The enzyme inhibition assays revealed the IC50 of TDME as 44.75 ± 0.51, 52.71 ± 0.01, and 67.19 ± 0.68 µgmL-1, which were significant compared to their respective standards (indomethacin, 18.03 ± 0.12; quercetin, 4.11 ± 0.01; and thiourea, 8.97 ± 0.11) for lipoxygenase, α-glucosidase, and urease, respectively. Safety was assessed by in vitro hemolysis (4.25% ± 0.16% compared to triton × 100, 93.51% ± 0.36%), which was further confirmed (up to 10 g/kg) by an in vivo model of rats. TDME demonstrated significant (p < 0.05) potential in analgesic activity by hot plate and tail immersion tests and anti-inflammatory activity by the carrageenan-induced hind paw edema model. Pain latency decreased significantly, and the anti-inflammatory effect increased in a dose-dependent way. Additionally, in silico molecular docking revealed that 1,3,4,5-tetracaffeoylquinic acid and formononetin 7-O-glucoside-6″-O-malonate possibly contribute to enzyme inhibitory activities due to their higher binding affinities compared to standard inhibitors. An in silico absorption, distribution, metabolism, excretion, and toxicological study also predicted the pharmacokinetics and safety of the chosen compounds identified from TDME. To sum up, it was shown that TDME contains bioactive chemicals and has strong biological activities. The current investigations on T. domingensis could be extended to explore its potential applications in nutraceutical industries and encourage the isolation of novel molecules with anti-inflammatory and analgesic effects.

A study of the wave dynamics of the space-time fractional nonlinear evolution equations of beta derivative using the improved Bernoulli sub-equation function approach.

The space-time fractional nonlinear Klein-Gordon and modified regularized long-wave equations explain the dynamics of spinless ions and relativistic electrons in atom theory, long-wave dynamics in the ocean, like tsunamis and tidal waves, shallow water waves in coastal sea areas, and also modeling several nonlinear optical phenomena. In this study, the improved Bernoulli sub-equation function method has been used to generate some new and more universal closed-form traveling wave solutions of those equations in the sense of beta-derivative. Using the fractional complex wave transformation, the equations are converted into nonlinear differential equations. The achieved outcomes are further inclusive of successfully dealing with the aforementioned models. Some projecting solitons waveforms, including, kink, singular soliton, bell shape, anti-bell shape, and other types of solutions are displayed through a three-dimensional plotline, a plot of contour, and a 2D plot for definite parametric values. It is significant to note that all obtained solutions are verified as accurate by substituting the original equation in each case using the computational software, Maple. Additionally, the results have been compared with other existing results in the literature to show their uniqueness. The proposed technique is effective, computationally attractive, and trustworthy to establish more generalized wave solutions.

Spatial variation in livelihood security among livestock-based agricultural farming systems in climatically vulnerable Indian Sundarbans.

Farm households in the UNESCO World Heritage site Sundarbans face serious problems, including increased soil salinity, frequent extreme weather events, seawater intrusion and flood damage, all of which cause distress to the livelihoods of the farm families. Policymakers commonly acknowledge livestock as a crucial resource for mitigating economic losses caused by crop failures due to extreme weather events. Despite Sundarbans' vulnerability to extreme weather events, smallholder farmers' livelihoods vary across the region. Identifying spatial livelihood variations aids in targeted strategies to address climate extremes. We chose the highest cow- and buffalo-populated blocks among the 19 blocks in the Sundarbans to assess variations in livelihood dimensions, including nutritional, economic, social and infrastructural security. We used dummy variable regression models to examine the differences in livelihood security dimensions among households living in different locations. The study found that Namkhana had the highest livelihood security score among the blocks studied, while Gosaba had the lowest score because it's in a remote area with limited infrastructure. The study found a significant difference in the overall livelihood security score among the blocks we examined, indicating the need for a location-specific, cluster-based approach for the overall development of the Sundarbans. The study can shape a policy framework for socio-economic development in the Indian Sundarbans through its findings on location-specific livelihood security. For securing smallholder farmers' livelihoods in the vulnerable Sundarbans region, policymakers must give priority to improving infrastructure, viz., roads, marketing facilities and animal healthcare centers.

Knowledge, Attitudes, and Practices Related to Cervical Cancer Prevention and Screening among Female Pharmacy Students at a Public University in a Southern Region of Saudi Arabia.

Despite the availability of human papillomavirus (HPV) vaccines and screening facilities at various health centers in Saudi Arabia, the annual death rate due to cervical cancer is high. Therefore, knowledge and awareness are essential for self-care and educating others, particularly among healthcare students. The present descriptive, cross-sectional study explored female pharmacy students' knowledge, attitudes, and practices related to cervical cancer. A total of 140 students participated in the survey. The survey was conducted for the period between April 2022 to September 2023. We observed a good knowledge score and positive attitudes among 8.5% and 93.5% of participants, respectively. A total of 10% of the study participants reported good practice scores. Most participants had never been screened for cervical cancer (94.3%). Among the non-screened subjects, feeling healthy and lacking information were the participants' significant reasons for not screening for cervical cancer. A positive history of cancer related to smoking significantly impacted the knowledge score (p = 0.050). The current study reveals that healthcare awareness programs for cervical cancer and HPV vaccination are necessary at the level of educational institutions to improve public health.

Effect of Soy Wax/Rice Bran Oil Oleogel Replacement on the Properties of Whole Wheat Cookie Dough and Cookies.

This study investigated the replacement of butter with soy wax (SW)/rice bran oil (RBO) oleogel in varied proportions in cookie dough and the resulting cookies. The study mainly evaluates the physical, textural, and chemical properties of the butter cookie dough and cookies by replacing butter with SW/RBO oleogel. The dough was assessed using moisture analysis, microscopy, FTIR Spectroscopy (Fourier Transform Infrared) and impedance spectroscopies, and texture analysis. Micrographs of the dough showed that D-50 (50% butter + 50% oleogel) had an optimal distribution of water and protein. D-0 (control sample containing 100% butter) showed the lowest impedance values. Moisture content ranged between 23% and 25%. FTIR spectroscopy suggested that D-50 exhibited a consistent distribution of water and protein, which CLSM and brightfield microscopy supported. Texture analysis revealed that the dough samples exhibited predominantly fluidic behavior. As the amount of oleogel was raised, the dough became firmer. The prepared cookies showed a brown periphery and light-colored center. Further, a corresponding increase in surface cracks was observed as the oleogel content was increased. Cookies moisture analysis revealed a range between 11 and 15%. Minute changes were observed in the texture and dimensions of the cookies. In summary, it can be concluded that replacing butter with oleogel by up to 50% seems to be feasible without significantly compromising the physicochemical properties of cookie dough and cookies.

Microparticle electrical conductivity measurement using optoelectronic tweezers.

When it comes to simulate or calculate an optoelectronic tweezer (OET) response for a microparticle suspended in a given medium, a precise electrical conductivity (later referred to as conductivity) value for the microparticle is critical. However, there are not well-established measurements or well-referenced values for microparticle conductivities in the OET realm. Thus, we report a method based on measuring the escape velocity of a microparticle with a standard OET system to calculate its conductivity. A widely used 6 µm polystyrene bead (PSB) is used for the study. The conductivity values are found to be invariant around 2×10-3 S/m across multiple different aqueous media, which helps clarify the ambiguity in the usage of PSB conductivity. Our convenient approach could principally be applied for the measurement of multiple unknown OET-relevant material properties of microparticle-medium systems with various OET responses, which can be beneficial to carry out more accurate characterization in relevant fields.

Studies on the Effect of the Addition of Nano-Spherical Particles of Aluminum on the Thermal, Mechanical, and Morphological Properties of PBT-PET Blend Composites.

In previous works, we had found that the addition of micron-sized, irregular-shaped aluminum (Al) powder, or Al nano platelets (flakes), improved the mechanical properties of polyesters, and that, additionally, the flakes led to an increase in electrical conductivity. The aim of this work was to examine the effect of nano-spherical particles of aluminum in a 60/40 PBT/PET polyester blend. A blend was used because it can help with the formation of a segregated network of metal particles that allows electrical conductivity at low loading. The notched Izod impact of Al nano-spherical composites increased with nano Al content up to an addition level of 2 vol.%. However, the tensile strength and flexural strength decreased gradually with increasing filler loading. Thus, the spherical shape and nano size of the Al particle caused it to be less effective than the micron-sized, irregular-shaped Al powder, or the Al flakes. The reason for this is that, while nano spherical particles have high surface area for bonding with the matrix, the Al-Al aggregation stands in the way of wetting by the polymer melt, whereas aggregation in flakes does not cause as much of a problem. The segregated network structure to enhance electrical conductivity did not form in this blend system with nano spherical particles. The nano-spherical Al acted as a nucleating agent but did not cause transesterification between the two polyesters or make it more susceptible to degradation.

A critical review of sustainable application of biochar for green remediation: Research uncertainty and future directions.

Biochar, a carbon-rich material produced from the pyrolysis of organic biomass, has gained significant attention as a potential solution for sustainable green remediation practices. Several studies analyze biomass-derived biochar techniques and environmental applications, but comprehensive assessments of biochar limitations, uncertainty, and future research directions still need to be improved. This critical review aims to present a comprehensive analysis of biochar's efficacy in environmental applications, including soil, water, and air, by sequentially addressing its preparation, application, and associated challenges. The review begins by delving into the diverse methods of biochar production, highlighting their influence on physical and chemical properties. This review explores the diverse applications of biochar in remediating contaminated soil, water, and air while emphasizing its sustainability and eco-friendly characteristics. The focus is on incorporating biochar as a remediation technique for pollutant removal, sequestration, and soil improvement. The review highlights the promising results obtained from laboratory-scale experiments, field trials, and case studies, showcasing the effectiveness of biochar in mitigating contaminants and restoring ecosystems. The environmental benefits and challenges of biochar production, characterization, and application techniques are critically discussed. The potential synergistic effects of combining biochar with other remediation methods are also explored to enhance its efficacy. A rigorous analysis of the benefits and drawbacks of biochar for diverse environmental applications in terms of technical, environmental, economic, and social issues is required to support the commercialization of biochar for large-scale uses. Finally, future research directions and recommendations are presented to facilitate the development and implementation of biochar-based, sustainable green remediation strategies.

The Effects of Dietary Inorganic and Organic Chromium Supplementation on Blood Metabolites, Hormones, and Mineral Composition of Blood and Internal Organs in Black Bengal goats.

The present study was performed to evaluate the influence of dietary inorganic and organic chromium (Cr) supplementation on blood biochemical constituents and mineral concentrations as well as the changes in the mineral composition of internal organs of Black Bengal goats. Thirty Black Bengal kids of 3 to 5 months (5.40 ± 0.34 kg body weight) were allocated randomly to five treatment groups. The five groups were control (without added Cr in a basal diet), 1.0, 1.5 mg/kg of inorganic Cr, 1.0, and 1.5 mg/kg of organic Cr added per kilogram of feed dry matter. The duration of the experiment was 150 days during which the changes in the blood biochemical and mineral concentrations at 0, 30, 60, and 150 days were evaluated. At the end of the trial, mineral composition in the muscle, skin, and internal organs (liver, lungs, kidney, heart, spleen, and testis) were analyzed. Any blood variables were not affected at or before 60 days of Cr supplementation. Both inorganic and organic Cr supplementation lowered (P < 0.05) concentrations of blood glucose, cortisol, non-esterified fatty acids, and ß-hydroxybutyric acid after 60 days of Cr supplementation. Organic Cr-supplemented groups exhibited higher (P < 0.05) blood insulin concentration and neutrophil activity compared to the control. Supplementation of Cr in either form had no substantial effect (P > 0.05) on the blood hemoglobin, total leukocyte count, total protein, albumin, globulin, immunoglobulin G, total antioxidant capacity, and liver enzymes (aminotransferases) concentration, and also blood minerals (zinc, iron, and manganese) concentration. Blood Cr and copper concentrations were increased (P < 0.05) due to both organic and inorganic Cr supplementation. Minerals (calcium, phosphorus, magnesium, iron, zinc, copper, and manganese) concentrations of internal organs of Cr-supplemented groups were mostly not affected (P > 0.05) by Cr supplementation. However, the concentrations of Cr and copper in blood and Cr in all internal organs, skin, and muscle of organic Cr-supplemented groups were higher (P < 0.05) than in those fed the basal diet. In conclusion, dietary inorganic and organic Cr supplementation, especially the organic form, after long term supplementation (> 60 days) could be beneficial in regulating blood glucose and fat metabolism and the immune status of Black Bengal goats.

Evaluation of Structural, Magnetic, and Electromagnetic Properties of Co2+-Substituted NiCuZn Ferrites.

We report citrate gel-assisted autocombusted spinel-type Co2+-substituted NiCuZn ferrites and their electromagnetic properties. Several complementary techniques were used to investigate the influence of Co on structural and electromagnetic properties of Ni0.25-xCoxCu0.20Zn0.55Fe2O4 with x = 0.00-0.25 (step of 0.05). XRD analysis confirmed the highly crystalline single-phase cubic spinel structure with a prominent peak of the (311) plane. FE-SEM analysis showed the loss of porous gel structure (colloidal backbone) due to addition of cobalt into the present ferrite system. The EDAX analysis confirmed the presence of Ni, Cu, Zn, Co, and O in accordance with the relative stoichiometry of Co-substituted NiCuZn ferrite. The electrical resistivity of ferrites is observed to decrease when Co2+ ions are substituted, regardless of AC and DC. The dielectric properties (ε' and ε″) of ferrites exhibited a consistent decrease as the frequency increased, and this trend persisted even at higher frequencies. VSM analysis showed the normal magnetic hysteresis of the developed ferrite system. At x = 0.05, the saturation magnetization of the ferrite was obtained to be the highest among the other substitution levels of Co. The Curie temperature fell down when there was a higher concentration of cobalt in the ferrite system (x = 0.20). After reaching a specific temperature, the µi values decreased abruptly, with an increase in the temperature. The steady state may be deduced from the fact that the constant real component of the initial permeability, µ', remained unchanged. However, with decreasing frequency, the values of µâ€³ decreased dramatically. The present NiCuZn ferrite series displays the enhanced dielectric properties suggesting the capability of potential candidates for microwave absorption applications with enhanced electromagnetic properties.